Where can I find basic snow blower troubleshooting information?
Single-Stage Snow Blowers
NOTE: Before attempting any of the following repairs, shut off engine and disconnect spark plug.
| Complaint | Possible Cause | Correction |
|---|---|---|
| Auger does not rotate when lever is engaged | An object is jammed in the auger housing | Clean auger housing |
| Cable conduit is frozen | Thaw conduit and lube with penetrating oil | |
| Incorrect belt tension | Adjust belt tension (see Operator's Manual) | |
| Belt worn or broken | Replace belt (see Operator's Manual) | |
| Snow discharge distance has decreased with no change in engine RPM | Incorrect belt tension | Adjust belt tension (see Operator's Manual) |
| Belt worn or broken | Replace belt (see Operator's Manual) | |
| Unit fails to thoroughly clean snow | Auger blades not completely contacting the ground | Tilt unit forward slightly when operating |
| Auger blades worn | Replace auger (see Operator's Manual or Brute Service Center) |
Dual-Stage Snow Blowers
NOTE: Before attempting any of the following repairs, shut off engine and disconnect spark plug.
| Complaint | Possible Cause | Correction |
|---|---|---|
| Auger does not rotate when lever is engaged | Shear bolts are broken | Replace shear bolts |
| An object is jammed in the auger housing | Clean auger housing | |
| Cable conduit is frozen | Thaw conduit and lube with penetrating oil | |
| Incorrect belt tension | Adjust belt tension (see Operator's Manual) | |
| Belt worn or broken | Replace belt (see Operator's Manual) |
